ASMe B16.20 API Monel And Inconel 625 Or Inconel 825 Or Alloy Spiral Wound Gasket

SpecificationsSpiral wound gaskets – Monel and Inconel spiral wound gasketDescriptionGinseal Spiral wound gaskets are made of V-formed metallic strip and flat filler material. V-formed  stainless strip works as spring providing structural support while the filler works as the sealing element. According to different service environment and different flanges, spiral wound gaskets are always supplied in different materials and types. Ginseal provides CGI type (with inner ring & outer ring), CG type (only with outer ring), R type (without inner & outer ring), RIR type (only with inner ring) and also in monel, inconel, alloy and other material. These gaskets are proved to be suitable in most applications, and allow lower clamping forces than solid gaskets, albeit with a higher cost.Spiral Wound Gasket in Monel and Inconel Material:Item no.: JSG – SW50,spiral wound gasket in monel,inconel,alloy20 material,etc..For example: Monel 400/Monel 400+FG/Monel 400Rings Material:Low Carbon Steel, SS304, 304L, SS316, SS316L, SS321, SS347, SS 410, Aluminium , Copper, Brass, Nickel 200, Monel 400, Inconel 600/625/800, Hastelloy B2, Titanium (see more information in our products catalogue)Choose FillerThe important part is the sealing element (also called filler) made up of V-formed SS strip and non- metallic filling tape, the material can be changed according to different chemical compatibility requirements.Graphite filling strip is good to be used in high temperature environment,PTFE filling strip is for acids and other corrosive mediumsNon-asbestos’ use is increased when the health problems with asbestos became known. But it’s only recommended for low temperature less severe applications due to the rubber content.Ceramic is in extremely high temperature applications. The filler is not so common as it cannot achieve the same leak tightness as graphiteMarking (standard):Marking on outer ring:- Manufacturer- Nominal Size - Pressure Range- Winding material + Filler Material- Manufactured to (standard)For example: GINSEAL 2"150# SS304/SS304+F.G./CS ASME B16.20SpecificationsWe deliver according to the following standards: ASME B16.20, ASME B16.47 Series A & Series B, ANSI B16.5, BS1560, BS EN1092, DIN, JIS, etc.Kindly provide follow details to inquiry &. Order:1 -- Nominal pipe size or specific gasket dimensions2 -- Pressure rating3 -- winding and filler materials4 -- centering / outer ring or inner ring materialFurther materials available upon request